Crystal Dragon Leaf Finial

These beautifully styled finials are made with Swarovski crystals with poles, rings and holdbacks in several finishes. Please specify finish.- Available in 3/4" & 1" diameter.-Due to freight length limitations, poles exceeding 8 feet have to be shipped motor freight and thus incur significant additional freight charges. To save on shipping, a pole splice is recommended for rod lengths exceeding 8 feet.-Shown in Heirloom.

Specify overall rod length not including finials. Brackets should be installed a minimum of 3" in form the rod ends. Please allow extra rod length to accommodate this. Professional installation into studs or wood backing is recommended. Indicate if rod will be two way center draw, one way stack left, or one way stack right. Specify cord location either right or left. Order brackets, finials and 2" ID rings as required. Reversible master carrier includes two 2" ID rings per carrier. Maximum span between brackets is 120".

3 1/2" Projection. Base is 1" x 4". Drop in with set screw. Projection is measured from the wall to the center of the rod. Bracket will be made to coordinate with the rod size ordered: 1/2", 3/4", 1" or 1 5/8"

6" Projection - Base is 3 1/2" x 1"-Use as a center support only. Drop in style bracket will be made to accommodate curtain rod size ordered: 1/2", 3/4", 1" or 1 5/8"-Base for 1 5/8" rod diameter will be 3.5 x 1.5-Curtain Rod Brackets

Base is 3 1/2" x 1". - 3/4" round rods drop = 1 3/8"; Overall length = 2 3/8"- 3/4" twist rods drop = 1 5/8"; Overall length = 2 7/8"- 1" rods drop = 1 5/8"; Overall length = 2 7/8"- 1 5/8 rods drop = 2 1/8"; Overall length = 4"

Allows installation directly into a corner. Projection adjusts from 3"-5". Hinged base is 3" x 3". Splices into 1" rods. Fits over 1/2"-3/4" rods. Not recommended for 1 5/8" rods. Specify wall angles and backwall measurements. Appropriate deductions will be made. Not recommended for use with heavy treatments.