1-800-590-5844

Order Custom Roller Shades

Item #860195 Phifer SheerWeave Style 7100 Blackout Shade

 Phifer Style 7100 Roller Shade
Approximate Openness: Opaque
Approximate UV Blockage: Opaque
Room darkening shades with total light blockage. Style 2000 with a durable vinyl backing.
Fire Classifications: CAL-117 NFPA 701 & more
Bacteria and Fungal Resistance: ASTM G21 & more
GREENGUARD and GREENGUARD Gold
Railroading is not recommended for this fabric.
Acoustical Performance. TrackLess. Lead Free.
Size requires fabric to be turned - railroaded. Please indicate all shades in the same room so all can be turned to match.
We recommend that shades over 144" wide should be motorized.
Vinyl coated fiberglass fabric with laminated 2-ply 100% PVC blackout film
Order A Solar Shade

Inside mount blinds and shades are installed inside the window casing. Provide exact window opening measurements as the factory will make deductions. There will be visible light gaps on both sides to allow operating clearance.
Outside mount blinds and shades are installed outside the window casing, covering an area larger than the window itself. Provide exact shade measurements. Add a minimum of 1 1/2 inches to the width as the fabric is narrower than the roller at the top.


↔Width:   Measure the top of the window across the horizon to determine window/shade width. Please refer to inside or outside mount instructions above.

↕Height     Measure the left, center and right from top to bottom and take the shortest measurement as your specified height.

Lift Type



Select a Color

Other Options Standard roll means the fabric rolls off the backside of the tube.  Reverse Roll option is so the fabric rolls off the front of the tube. Reverse Roll is available at no charge, but is not compatible with the cassette valance option. NOTE: For optimal privacy and light control, Standard Roll should be used.
Standard Roll - Reverse Roll
Bottom Hembars

$334.95

Measuring Width
For Inside Mount - Measure from sill to sill at top of window only. Factory will make allowances for control mechanisms.
For Outside Mount - Specify and order by desired fabric width. Please note that control mechanism will add to width.

Measuring Height
Determine height in 1" increments.