Order Custom Roller Shades

Inside mount blinds and shades are installed inside the window casing. Provide exact window opening measurements as the factory will make deductions. There will be visible light gaps on both sides to allow operating clearance.
Outside mount blinds and shades are installed outside the window casing, covering an area larger than the window itself. Provide exact shade measurements. Add a minimum of 1 1/2 inches to the width as the fabric is narrower than the roller at the top.

Choose Mount Inside Outside

---

Measurements - Enter Size in inches ↔Width: 72737475767778 0/0" 1/8" 1/4" 3/8" 1/2" 5/8" 3/4" 7/8"   Measure the top of the window across the horizon to determine window/shade width. Please refer to inside or outside mount instructions above.

↕Height 96979899100101102103104105106107108  0/0" 1/8" 1/4" 3/8" 1/2" 5/8" 3/4" 7/8"   Measure the left, center and right from top to bottom and take the shortest measurement as your specified height.

Choose Shade Color

Select a ColorRL1 SwanRL2 OysterRL3 SailRL4 ChiffonRL5 ChromeRL6 Earl GreyRL7 BlazerRL8 Raven

Choose Chain Color if Applicable: Color Coordinated Chain Stainless Steel ChainNA

Chain Length:

Chain Location: Right Left Cordless

Bracket Color: Zinc White Gray Black

Other Options

Standard roll means the fabric rolls off the backside of the tube.  Reverse Roll option is so the fabric rolls off the front of the tube. Reverse Roll is available at no charge, but is not compatible with the cassette valance option. NOTE: For optimal privacy and light control, Standard Roll should be used.
Standard Roll Reverse Roll