Super Flex Curtain Track

3 1/2" Long-1 3/4" Wide-1 3/4" Tall-Adjutable wall clearance with max projection of 3"-Use with ceiling mount cartridge or double track ceiling mount cartridge. Works with valance track installation-This replaces (same dimensions) as WB-S

Does not include curtain ring. Clip with loop only. Made to use with curtain rings with eyelets. Package of 24-Curtain Rings With Eyelet-Curtain Rings With Clips-Curtain And Drapery Hardware-Drapery And Curtain Rings

This Super Flexible ceiling and curtain track is packaged and ready to go. The kit includes 79" track, 22 rollers, 1 pair of magnetic catches, 2 end caps and 9 ceiling/wall mounting cartridge brackets. Mount brackets 2" in from end of track and then every 12". Brackets help you create the desired curve. Track can also be installed for straight applications as well.-Instructions PDF-Bay Window Curtain Rods Corner Window Curtain Rods

This Super Flexible ceiling and curtain track is packaged and ready to go. The kit includes 118" track, 34 rollers, 1 pair of magnetic catches, 2 end caps and 12 ceiling/wall mounting cartridge brackets. Mount brackets 2" in from end of track and then every 12". Brackets help you create the desired curve. Track can also be installed for straight applications as well.-Instructions PDF-Bay Window Curtain Rods Corner Window Curtain Rods

Adjustable Height - This hook works with the super flex rollers for a nice way to conceal track and mounting hardware. Use on the back side of curtain fabric, 1/2" below the rim, folding around the paper thin plastic with arrow hole pointing up and exposing the thick hook channel. Then, sew or staple into place. The hook is removable by sliding it downward. Curtain height can be adjusted to max. of 3". Size: 3-3/4"x 7/12". Order equal amount of hooks as you would rollers; we recommend 4 rollers per foot of track.-Flexible Curved And Arched Rods-Ceiling And Curtain Track

How to connect two tracks with splicer: (1) Loosen screws on splice, position screws toward back side of the track. (2) Cut the track square, insert top flange of the track up to mid point of the splice. (3) Tighten the screw so that metal key on splice locks into the slot. (4) Repeat the same to splice two tracks tight together.-Flexible Traverse Rod -Ceiling And Curtain Track

Use of Ceiling Mount Bracket required with this item-Recommended Use: 1 for every 1 foot of track-6" L X 1-1/12" W X 3-1/2" H - adjustable length 3-1/4" -Replaced with item: 791234

Everything you need to attach a valance to the track assembly. Fabric is attached using velcro. Contents: Velcro Tape, Clips, End Caps and Valance Track. With wall mounted track, order Extended Projection Bracket for Wall Mount and Ceiling Mount Cartridge instead of Wall Mount Bracket (Standard). For ceiling mount, nothing additional required. Valance clip measures 4 inches. Projection will depend on where you attach to bracket.-Ceiling And Curtain Track